Analog 2/3 in X-ray Camera with a 16 to 50mm Fiber Taper Scintillation Surface with a variable thickness Gadolinium Oxysulphide (GdOS) scintillation layer. Perfect for inexpensive inspection instruments where cost is a factor. |
X-ray Camera with a 70mm Diameter Fiber Taper (Custom Diameters Available on Request) and a Gadolinium Oxysulphide (GdOS) Scintillation Layer. Perfect for Inexpensive Inspection Instruments Where Cost is a Factor. |
Digital, 2/3 Inch, X-Ray Camera with a 25 mm or Larger Fiber Optic Taper with a Gadolinium Oxysulphide (GdOS) Scintillation Coating to Convert X-Rays to Photons. Ideal for Inspecting Small Items Where Cost is a Factor. |
Camera
Features:
- X ray energy sensitivity varies between 5 to 120 keV
- Analog NTSC output is very convenient output for computer viewing
- 470TVL resolution
- 2/3 inch sensor via KP-M1
- Customizeable fiber tapers available
- We bond Fiber Taper directly to CCD surface
- Expected lifetime of CCD greatly enhanced via use of FO coupling
- Individually built and tested by experts
- Recommended Frame Grabber is Euresys Picolo but works with any FG
- Camera can integrate up to 1/2 second or integration can be performed via FG
- This modification is avail for your camera as well...
Applications:
- X-Ray Inspection
- Military Technology
- Optical Inspection at Close Proximity
- Magnification Applications
- PCB Inspection
|
Camera
Features:
- X-Ray energy sensitivity varies between 5 to 120 keV
- CameraLink® or GigE output
- 2K x 2K Sensor for high resolution and large x-ray field of view
- Customizable diameter fiber tapers available
- Expected lifetime of CCD greatly enhanced via use of FO coupling
- Individually built and tested by experts
Applications:
- X-Ray Inspection
- Military Technology
- Optical Inspection at Close Proximity
- Magnification Applications
- PCB Inspection
|
Camera
Features:
- 1.3 Megapixel X-ray camera with GigE output
- X-Ray energy sensitivity (5 to 120 keV)
- 25 mm diameter fiber taper – Fiber ratio is 2.27 to 1
- Customizable diameter fiber tapers available
- High resolution – 1388 (H) x 1040 (V) pixels
- Progressive scan 2/3-inch CCD image sensor
- 30 FPS at maximum resolution
- Can integrate up to 3 minutes
- Supports Matrox Imaging Library (MIL), LabVIEW®, and GenICam™
- Hardware supported YUV conversion
- External Trigger support Mode 0, 1, 2, 3, 4, 5, 12, 13, 14, 15
- Multi Camera Auto Sync support
- One shot and Multishot
- SIO Pass through and Strobe support
- True Fast Partial Scan support
- Horizontal and Vertical Binning Mode
- Firmware upgradable via LAN
- Includes software for API, SDK
Applications:
- X-Ray Inspection
- Military Technology
- Optical Inspection at Close Proximity
- Magnification Applications
- PCB Inspection
|