Analog 2/3 Inch X-ray Camera with a 16 or 25mm Diameter Fiber Taper (Custom Diameters Available on Request) and a Scintillation Layer. Perfect for inexpensive BGA, PCB, watch, small delicate part, inspection instruments where cost is a factor.

The Fiber Cam/H represents a new way to capture X-ray images with standard analog CCD sensors. The Fiber Cam/H is a standard 2/3" monochrome CCD Camera with a fused fiber optic bundle that is attached directly to the image sensor with proprietary technology. It is designed for OEMs who wish to use a standard camera with X-Ray sources. Using this technology the sensor is at least 1/2" away from the sensor and will thus reduce the rate of sensor deterioration.This camera is currently based on the industry standard Hitachi KP-M1. Camera specs are therefore the same. The camera of choice may be changed with payment of some engineering charges. Our scintillation layer is applied directly to the surface of the fiber-optic bundle for maximum efficiency . The thickness of the layer can be adjusted and its preparation is our proprietary technology. This layer is very sensitive to scratches and thus the camera ships with a thin aluminum cover plate.

Features

• X-Ray energy sensitivity varies between 5 to 120 keV
• Analog NTSC output is very convenient output for computer viewing
• 470TVL resolution
• Based on Hitachi 2/3 inch sensor via KP-M1
• Customizable fiber tapers available
• We bond Fiber Taper directly to CCD surface
• Expected lifetime of CCD greatly enhanced via use of FO coupling
• Individually built and tested by experts
• Recommended Frame Grabber is Euresys Picolo but works with any FG
• Camera can integrate up to 1/2 second or integration can be performed via FG
• This modification is avail for your camera as well...

Camera Applications

• X-Ray Inspection
• Military Technology
• Optical Inspection at Close Proximity
• Magnification Applications
• PCB Inspection

Note: Customer must provide the X-Ray source.

Ordering Information