HOME  |  COMPANY  |  NEWS  |  CONTACT  |  SITEMAP       
   
 X-Ray Camera - Fiber Cam II™
Click to Enlarge Photo
Download Datasheet
 

 

 X-Ray Camera - Fiber Cam II™
X-ray Camera with a 70mm Diameter Fiber Taper (Custom Diameters Available on Request) and a Gadolinium Oxysulphide (GdOS) Scintillation Layer. Perfect for Inexpensive Inspection Instruments Where Cost is a Factor.

The Fiber Cam II represents a new way to capture X-ray images with standard CCD sensors. The Fiber Cam II is a CCD Camera with a fused fiber optic taper that is attached directly to the image sensor with proprietary technology. Our GdOS scintillation layer is applied directly to the surface of the fiber-optic bundle for maximum efficiency using our proprietary technology. The camera ships with a thin aluminized window to protect this layer from scratches. The Fiber Cam II is designed for OEMs who wish to use a standard camera with X-Ray sources. Using this technology the GdOS layer is several inches away from the sensor and will thus reduce the rate of sensor deterioration.

 

Features
  • X-Ray energy sensitivity varies between 5 to 120 keV
  • CameraLink® or GigE output
  • 2K x 2K Sensor for high resolution and large x-ray field of view
  • Customizable diameter fiber tapers available
  • Expected lifetime of CCD greatly enhanced via use of FO coupling
  • Individually built and tested by experts


Camera Applications
  • X-Ray Inspection
  • Military Technology
  • Optical Inspection at Close Proximity
  • Magnification Applications
  • PCB Inspection

 

SPECIFICATIONS
CCD Size 1"
Pixels 2048 (H) x 2048 (V)
Cell Size 7.4 (H) x 7.4 (V) um
Aspect Ratio 1:1
Digital Format 8/10/12 bit
SN 56 dB
Frame Rate 11 fps to 20 fps
Shutter 1/14000 – 7 seconds
Output CameraLink® or GigE
Power 12V DC
Output RS-170 1.0 V p-p
Power 12V DC
Input Size 50mm x 50mm (other sizes upon request)
Input Pixel Size (horizontal) 24.8 um
Limiting Resolution at: Input Window (depending on x-ray coating) 20 lp/mm
Energy Range 5 to 120 KeV (can be optimized for certain energy ranges)
Input Window Protective Cover Aluminized (other window materials available upon request)
Saturation Signal 40,000 e-
Dimensions 68 mm wide x 68 mm high x 129 mm deep Front of camera is about 80mm in diameter
Options
  • Custom window materials for lower kV applications
  • Custom fiber optic diameter

 

Ordering Information
Fiber Cam II/Std: 

Standard unit camera with standard GdOS coating (balanced for resolution and max light output)

Fiber Cam II/Option 1:  Without GdOS coating (for non-x-ray applications)
Fiber Cam II/Option 2:  Custom protective input window material (e.g., aluminum, mylar)
 

      ViewBits ™, Division of Computer Modules, Inc.                                                                                                                                                             © 2003-2016 ViewBits.com. All rights reserved.  
      11409 West Bernardo Court • San Diego, CA 92127 phone:  (858) 613-1818 • fax: (858) 613-1815