HOME  |  COMPANY  |  NEWS  |  CONTACT  |  SITEMAP       
   
Fiber Cam III™ 

1.3 Megapixel X-ray Camera with GigE Output 

CameraLink® or GigE Output
Download Datasheet
 

 

 X-Ray Camera -- Fiber Cam III™, 1.3 Megapixel X-ray Camera with GigE Output
Digital, 2/3 Inch, X-Ray Camera with a 25 mm, or Larger Fiber Optic Taper with a Gadolinium Oxysulphide (GdOS) Scintillation and Coating to Convert X-Rays to Photons. Ideal for Inspecting Small Items or Where Cost is a Factor.

The Fiber Cam III represents a cost effective way to capture clear X-ray images with standard CCD sensors.  The Fiber Cam III is a CCD Camera with a fused fiber optic taper that is attached directly to the image sensor with proprietary techniques.

Our GdOS coating is applied directly to the surface of the fiber-optic bundle for maximum efficiency using our proprietary technology.  An optional CsI scintillator is also available.  The camera ships with a thin aluminum window to protect the x-ray sensitive layer.

The Fiber Cam III is designed for OEMs who wish to use a standard Gig/E camera with X-Ray sources.  Using this technology the sensor is several inches away from the x-ray source, thus reducing the rate of sensor deterioration.

Features
  • 1.3 Megapixel X-ray camera with GigE output
  • X-Ray energy sensitivity (5 to 120 keV)
  • 25 mm diameter fiber taper – Fiber ratio is 2.27 to 1
  • Customizable diameter fiber tapers available
  • High resolution – 1388 (H) x 1040 (V) pixels
  • Progressive scan 2/3-inch CCD image sensor
  • 30 FPS at maximum resolution
  • Can integrate up to 3 minutes
  • Supports Matrox Imaging Library (MIL), LabVIEW®, and GenICam™
  • Hardware supported YUV conversion
  • External Trigger support Mode 0, 1, 2, 3, 4, 5, 12, 13, 14, 15
  • Multi Camera Auto Sync support
  • One shot and Multishot
  • SIO Pass through and Strobe support
  • True Fast Partial Scan support
  • Horizontal and Vertical Binning Mode
  • Firmware upgradable via LAN
  • Includes software for API, SDK


Camera Applications
  • X-Ray Inspection
  • Military Technology
  • Optical Inspection at Close Proximity
  • Magnification Applications
  • PCB Inspection

 

SPECIFICATIONS
Image Sensor 2/3” CCD, ICX285 AL/AQ
Picture Size 1388 (H) x 1040 (V)
Data Path 8 bit or 12 bit B/W
Pixel Size 6.45 x 6.45 μm
Pixel Size at Input 14.6 microns
Max FPS / Max Res. 30 fps
Fiber Taper 25 mm diameter (Custom diameters available on request)
Fiber Ratio 2.27 to 1 for the 25mm taper
Limiting Resolution at Input Window 20+ lp/mm (depending on x-ray coating)
Energy Range 5 to 120 KeV (can be optimized for certain energy ranges)
Input Window Protective Cover Aluminized (other window materials available upon request)
Saturation Signal 40,000 e-
Scanning System Progressive Scan
Binning 1x1, or 2 x 2
ROI Partial Scan (Unit: 4x4)
Trigger Edge: Rising Edge or Falling Edge
Mode: Mode 0, 1, 2, 4, 5, 12, 13, 15
Source: External Trigger (Photo-coupler) or Software Trigger
Strobe Output Supports Normal Mode or Trigger Mode (Photo-coupler) 0, 1
Memory Save/Load 9 Channels (0: factory, 1~4: feature, 5~8: mode/feature)
SIO (RS-232) Pass through or Command
Digital Interface GigE Vision Interface compliant to GenICam™
Gain Control 0 ~ 18 dB (Manual or Auto)
Shutter Speed 1 μsec ~ 3600 sec
S/N Ratio 56 dB or better
Control Function Brightness, Sharpness, Gamma, Auto-Exposure, Auto-gain, Auto-Shutter, (*U/B, V/R, Hue/G (digital gain)
Lens Mount C / CS Mount
External Dimensions 40(W) x 40(H) x 79(D) mm, Approx.180 grams
Supports Matrox Imaging Library (MIL), LabVIEW®, and GenICam™
Includes Software for API, SDK, and DirectShow® driver
Options
  • Custom window materials for lower kV applications
  • Custom fiber optic diameter

 

Ordering Information
X-Ray Camera GigE 1.3MP/Std:  Standard unit camera with standard GdOS coating (balanced for resolution and max light output)
X-Ray Camera GigE 1.3MP/Option 1:  Without GdOS coating (for non-x-ray applications)

X-Ray Camera GigE 1.3MP/Option 2:  Custom protective input window material (e.g., aluminum, mylar)
X-Ray Camera GigE 1.3MP/Option 3:  CsI scintillator

 

  NOTE:  Customer must provide the X-ray source.
 

Optional Accessories:
Power, Trigger cable
Tripod Adaptor

 

      ViewBits ™, Division of Computer Modules, Inc.                                                                                                                                                             © 2003-2016 ViewBits.com. All rights reserved.  
      11409 West Bernardo Court • San Diego, CA 92127 phone:  (858) 613-1818 • fax: (858) 613-1815