Click to Enlarge Photo
Download Datasheet
Example Photos Taken


  Standard Definition Analog Out X-ray Camera with GdOS Sensor - Fiber Cam™
Analog 2/3 Inch X-ray Camera with a 16 or 25mm Diameter Fiber Taper (Custom Diameters Available on Request) and a Gadolinium Oxysulphide (GdOS) Scintillation Layer. Perfect for Inexpensive Inspection Instruments Where Cost is a Factor.

The Fiber Cam represents a new way to capture X-ray images with standard analog CCD sensors. The Fiber Cam is a standard 2/3" monochrome CCD Camera with a fused fiber optic bundle that is attached directly to the image sensor with proprietary technology.

Our GdOS scintillation layer is applied directly to the surface of the fiber-optic bundle for maximum efficiency using our proprietary technology. The camera ships with a thin aluminized window to protect this layer from scratches.

The Fiber Cam is designed for OEMs who wish to use a standard camera with X-ray sources. Using this technology the GdOS layer is at least 1/2" away from the sensor and will thus reduce the rate of sensor deterioration.

  • X ray energy sensitivity varies between 5 to 120 keV
  • Analog NTSC output is very convenient output for computer viewing
  • 470TVL resolution
  • 2/3 inch sensor via KP-M1
  • Customizable diameter fiber tapers available
  • Expected lifetime of CCD greatly enhanced via use of FO coupling
  • Individually built and tested by experts
  • Tested Frame Grabbers: Euresys, Matrox, Mikrotron
  • Camera can integrate up to 1/2 second or integration can be performed via FG
  • this modification is avail for your camera as well...
Camera Applications
  • X-Ray Inspection
  • Military Technology
  • Optical Inspection at Close Proximity
  • Magnification Applications
  • PCB Inspection


Imager 2/3"
Pixels 768 (H) x 494 (V)
Cell Size 11.6 (H) x 13.6 (V) um
Aspect Ratio 4:3
Resolution 570 (H) x 485 (V) TV lines
SN 56 dB
Gamma 0.45 to 1.0
AGC On/Off
Shutter 1/100-1/10000
Sync Internal/External
Trigger Field on Demand
Output RS-170 1.0 V p-p
Power 12V DC
Fiber Bundle 16mm, 25mm
Input Diameter Standard (other sizes available on request)
Input Pixel Sizes (horizontal) 20 um, 31 um
Limiting Resolution at Input Window (depending on x-ray coating) 18 lp/mm, 12 lp/mm
Energy Range 5 to 120 keV
(can be optimized for certain energy ranges)
Input Window Protective Cover Aluminum (other window materials available upon request)
Options Custom window materials for lower kV applications
Custom fiber optic diameter
Video RS-170, 1.0 V p-p

NOTE: Customer must provide the X-ray source.

Ordering Information
Fiber Cam/Std: Standard Unit X-Ray camera with standard GdOS coating (balanced for resolution and max light output)
Fiber Cam/Option 1: Without GdOS coating (for non-x-ray applications)
Fiber Cam/Option 2: Custom protective input window material (e.g., aluminum, mylar)

      ViewBits ™, Division of Computer Modules, Inc.                                                                                                                                                             © 2003-2016 ViewBits.com. All rights reserved.  
      11409 West Bernardo Court • San Diego, CA 92127 phone:  (858) 613-1818 • fax: (858) 613-1815